Derbi Euro 3 Ignition Cover – Piss-Man Design
Its raised humorous artwork is integrated directly into the part, turning the standard ignition cover into a genuine visual feature of your engine.
This model is designed to stand out.
The surface features a Piss-Man illustration combined with graphic elements and 13RACE branding. The raised construction adds depth to the artwork and keeps the details of the design directly integrated into the part.
The overall shape remains smooth and rounded to work naturally with the engine casing, while the different relief levels create contrast between the background and the graphic elements.
Available in different colours, this cover can be matched to the rest of your engine setup.
⚠️ IMPORTANT INFORMATION ⚠️
- Product available by order only. No stock available for immediate shipment.
- Product visuals and 3D renders are non-contractual.
- Final colours may vary slightly depending on screen settings and manufacturing batches.
- Product manufactured using 3D printing by 13RACE.
- To help prevent screws from loosening due to vibration, the use of a low-strength threadlocker is recommended.
Product Overview
The cover follows the shape of the original ignition cover while integrating its artwork directly into the design.
The design includes:
- A raised Piss-Man illustration.
- AM6 lettering integrated into the artwork.
- 13RACE branding.
- Multiple relief levels to emphasise the different graphic elements.
Compatibility
Compatible with Derbi Euro 3 engines.
Including models equipped with this engine configuration:
- Derbi Senda
- Derbi DRD
- RCR
- Gilera SMT
- Aprilia SX
- Aprilia RX after 2006
Check your engine version before ordering to confirm compatibility.
Quality & Finish
- High-precision 3D printed construction.
- Artwork directly integrated into the part.
- Several colours available.
- Relief finish designed to highlight the different elements of the artwork.
- Manufactured by 13RACE.
Installation
The cover is designed to use the original ignition cover mounting points.
- Remove the original cover.
- Clean the mounting surfaces.
- Position the 13RACE cover.
- Install the mounting screws.
- Tighten progressively without excessive force.
- The use of a low-strength threadlocker is recommended to help secure the screws against vibration.
Why Choose This Ignition Cover?
- Original artwork integrated directly into the part.
- Detailed relief giving the design additional depth.
- A distinctive alternative to standard ignition covers.
- Several colours available to match your setup.
- 3D manufactured by 13RACE.
The Derbi Euro 3 Ignition Cover – Piss-Man Design turns a standard engine component into a genuine graphic feature.
Its raised artwork gives it a distinctive identity that differs from more conventional designs while maintaining a configuration suited to Derbi Euro 3 engines.
Frequently Asked Questions
Comment fonctionne le programme Ambassadeur!?
Notre programme partenaire est conçu pour récompenser les pilotes et passionnés qui soutiennent et font grandir 13RACE ! Que tu sois sur piste, en MX ou sur la route, voici comment ça fonctionne :
La Sélection : Tout commence par ta candidature via notre formulaire en ligne. Nous analysons ton profil en fonction de ta communauté, de ta fréquence de roulage et de ton expérience avec nos produits.
Le Partage : Si ton profil est retenu, tu reçois des accès pour te connecter à un portail privé ainsi qu'un code promo exclusif à partager autour de toi.
Le Challenge (3 mois) : L'objectif est simple : ton code promo doit être utilisé pour valider 5 commandes. Tu as un cycle de 3 mois pour atteindre cet objectif. Passé ce délai, ton compteur de ventes est réinitialisé et un nouveau cycle démarre !
La Récompense : Dès que tu atteins les 5 utilisations validées, ton espace Ambassadeur débloque automatiquement un code cadeau de -100%. Celui-ci te permet de commander gratuitement la pièce 3D de ton choix parmi notre sélection de récompenses !
N'hésite pas à nous rejoindre et à équiper ta machine pour faire tomber le chrono !
Comment monter les pièces ?
Toutes nos pièces sont conçues pour être "Plug & Play" sur les supports d'origine.
Vos pièces résistent-elles à la chaleur ?
Oui, nous utilisons des matériaux capables de résister sans déformation.
