Derbi Euro 3 / Euro 4 Ignition Cover
Its design combines a brass-knuckle-style sprocket protection with a « Piss-Boy » relief illustration, creating a distinctive custom finish. Designed for Derbi Euro 3 and Euro 4 engines, it replaces the original cover while adding a unique touch to your engine.
Give your engine a more distinctive look by replacing the standard ignition cover.
This 13RACE ignition cover was designed to add a genuine custom touch to Derbi Euro 3 and Euro 4 engines. Its design combines a brass-knuckle-inspired structure around the sprocket protection with a raised « Piss-Boy » illustration featuring the AM6 logo.
Manufactured using high-precision 3D printing by 13RACE, this cover is designed for use in the engine environment while providing an original finish for customised builds and configurations.
The cover installs directly onto the engine's original mounting points, allowing you to replace the original cover without specific modifications to the engine casing.
⚠️ IMPORTANT INFORMATION ⚠️
- Product visuals and 3D renders are non-contractual.
- colours may vary slightly depending on screen settings and manufacturing batches.
- To help prevent screws from loosening due to vibration, we recommend using a medium/low-strength threadlocker when tightening the screws.
- Product manufactured using 3D printing by 13RACE.
This ignition cover replaces the original cover fitted to Derbi Euro 3 and Euro 4 engines.
Its detailed design covers the ignition and sprocket area with an original custom part while retaining the engine's original mounting points.
The part features:
- A brass-knuckle-style sprocket protection design.
- A raised « Piss-Boy » illustration.
- 13RACE branding.
- A design made to use the original engine mounting points.
Compatibility
Compatible with Derbi Euro 3 and Euro 4 engines, including the following models:
- Derbi Senda
- Derbi DRD
- Gilera RCR
- Gilera SMT
- Aprilia SX
- Aprilia RX after 2006
Check your engine version before ordering to ensure compatibility.
Quality & Finish
- High-precision 3D printed construction.
- Manufactured by 13RACE.
- Detailed raised design.
- Designed to use the original mounting points.
- Available in the different colours offered in the 13RACE catalogue.
Available colours may include:
- Black
- White
- Red
- Blue
- Green
- Orange
- Purple
- Magenta
- And other colours available on the website
Installation
The cover is designed to install directly onto the engine's original mounting points.
- Remove the original ignition cover.
- Clean the mounting surfaces and check the mounting points.
- Position the 13RACE cover.
- Reinstall the mounting screws.
- Tighten the screws correctly without excessive force.
- The use of a low-strength threadlocker is recommended to help prevent loosening caused by vibration.
Why Choose This Ignition Cover?
- Exclusive design developed by 13RACE.
- 3D manufactured in France.
- Compatible with the specified Derbi Euro 3 and Euro 4 engines.
- Uses the original mounting points.
- Multiple colours available.
- Allows you to customise the appearance of your engine with a unique part.
The Derbi Euro 3 / Euro 4 Ignition Cover – Brass Knuckle & Piss-Boy Design is an ideal part for giving your engine a distinctive custom finish.
With its raised design, 13RACE 3D manufacturing and wide range of available colours, it replaces the original cover with a much more distinctive custom component.
Frequently Asked Questions
Comment fonctionne le programme Ambassadeur!?
Notre programme partenaire est conçu pour récompenser les pilotes et passionnés qui soutiennent et font grandir 13RACE ! Que tu sois sur piste, en MX ou sur la route, voici comment ça fonctionne :
La Sélection : Tout commence par ta candidature via notre formulaire en ligne. Nous analysons ton profil en fonction de ta communauté, de ta fréquence de roulage et de ton expérience avec nos produits.
Le Partage : Si ton profil est retenu, tu reçois des accès pour te connecter à un portail privé ainsi qu'un code promo exclusif à partager autour de toi.
Le Challenge (3 mois) : L'objectif est simple : ton code promo doit être utilisé pour valider 5 commandes. Tu as un cycle de 3 mois pour atteindre cet objectif. Passé ce délai, ton compteur de ventes est réinitialisé et un nouveau cycle démarre !
La Récompense : Dès que tu atteins les 5 utilisations validées, ton espace Ambassadeur débloque automatiquement un code cadeau de -100%. Celui-ci te permet de commander gratuitement la pièce 3D de ton choix parmi notre sélection de récompenses !
N'hésite pas à nous rejoindre et à équiper ta machine pour faire tomber le chrono !
Comment monter les pièces ?
Toutes nos pièces sont conçues pour être "Plug & Play" sur les supports d'origine.
Vos pièces résistent-elles à la chaleur ?
Oui, nous utilisons des matériaux capables de résister sans déformation.
