Derbi Euro 3 Sprocket Cover – Brass Knuckle Design
Its shape takes inspiration from a brass knuckle, featuring circular openings and an open central structure that gives the part a strong mechanical and aggressive appearance. A custom piece designed to stand out from conventional sprocket covers.
This is not simply a standard plate designed to cover the sprocket.
The design takes its visual inspiration from a brass knuckle, with several integrated circular openings, a large central cut-out and carefully shaped contours that give the part a strong three-dimensional appearance.
It was designed to work visually with the 13RACE Derbi ignition covers, creating a coherent engine setup rather than treating the sprocket cover as an isolated component.
Available in different colours, it can either match your engine setup or be used to create a contrasting combination.
⚠️ IMPORTANT INFORMATION ⚠️
- Product available by order only. No stock available for immediate shipment.
- Product visuals and 3D renders are non-contractual.
- Final colours may vary slightly depending on screen settings and manufacturing batches.
- This sprocket cover is designed for use with the compatible 13RACE Derbi ignition covers listed below.
Product Overview
The main feature of this part is its brass-knuckle-inspired structure.
The four circular openings and central cut-out create an open design while maintaining a strong visual presence around the sprocket.
The outer profile uses deliberately angular geometry to reinforce the aggressive appearance and create a cohesive look with other 13RACE engine components.
Compatibility
Compatible with Derbi Euro 3 engines.
This sprocket cover is compatible with all of our Derbi ignition covers, except:
- Derbi V2 ignition cover
- Derbi V3 ignition cover
Before ordering, make sure your 13RACE Derbi ignition cover is one of the compatible versions.
Quality & Finish
- 3D printed by 13RACE.
- Open design with raised details and shaped contours.
- Brass-knuckle-inspired geometry.
- Available in several colours.
- Designed to integrate with customised engine setups.
Installation
The sprocket cover is installed together with a compatible 13RACE Derbi ignition cover.
- Check compatibility with your ignition cover.
- Correctly position the sprocket cover.
- Use the appropriate mounting hardware.
- Tighten the screws progressively without excessive force.
- Make sure the cover does not contact any moving transmission components before use.
Why Choose This Sprocket Cover?
- A design that stands apart from conventional sprocket covers.
- Directly inspired by the shape of a brass knuckle.
- Designed to visually match 13RACE ignition covers.
- Several colours available for different builds.
- An easy way to give the transmission area a stronger visual identity.
The Derbi Euro 3 Sprocket Cover – Brass Knuckle Design gives the transmission area a distinctive custom identity.
With its open geometry and brass-knuckle-inspired design, it turns an otherwise discreet part of the engine into a genuine styling element.
Frequently Asked Questions
Comment fonctionne le programme Ambassadeur!?
Notre programme partenaire est conçu pour récompenser les pilotes et passionnés qui soutiennent et font grandir 13RACE ! Que tu sois sur piste, en MX ou sur la route, voici comment ça fonctionne :
La Sélection : Tout commence par ta candidature via notre formulaire en ligne. Nous analysons ton profil en fonction de ta communauté, de ta fréquence de roulage et de ton expérience avec nos produits.
Le Partage : Si ton profil est retenu, tu reçois des accès pour te connecter à un portail privé ainsi qu'un code promo exclusif à partager autour de toi.
Le Challenge (3 mois) : L'objectif est simple : ton code promo doit être utilisé pour valider 5 commandes. Tu as un cycle de 3 mois pour atteindre cet objectif. Passé ce délai, ton compteur de ventes est réinitialisé et un nouveau cycle démarre !
La Récompense : Dès que tu atteins les 5 utilisations validées, ton espace Ambassadeur débloque automatiquement un code cadeau de -100%. Celui-ci te permet de commander gratuitement la pièce 3D de ton choix parmi notre sélection de récompenses !
N'hésite pas à nous rejoindre et à équiper ta machine pour faire tomber le chrono !
Comment monter les pièces ?
Toutes nos pièces sont conçues pour être "Plug & Play" sur les supports d'origine.
Vos pièces résistent-elles à la chaleur ?
Oui, nous utilisons des matériaux capables de résister sans déformation.
