Universal V1 Wheel Sliders (Set of 4) – All Motorcycles & Track Protection
Made from a high-strength material and available in all colors from the 13RACE catalog, they combine protection and customization.
-Compatibility: Universal (all motorcycles and engine sizes).
-Fits hollow axles or solid axles.
-All colors available.
-Sold as a set of 4 sliders.
⚠️ IMPORTANT INFORMATION ⚠️
Installation: Two mounting methods are possible depending on your motorcycle:
-Pass a threaded rod through a hollow wheel axle.
-Drill and tap the wheel axle for M6 screw installation.
Screws: M6x30 screws are supplied only if you select the corresponding option when placing your order.
Safety: We strongly recommend applying threadlocker (Loctite) during installation. Alternatively, nail polish can also be used to prevent screws from loosening due to vibrations.
Images: The photos shown are for illustration purposes only. Colors may vary slightly depending on the materials used and your screen settings.
The 13RACE V1 Wheel Sliders have been developed to protect the most exposed parts of your motorcycle in the event of a crash or slide.
Thanks to their robust design and rounded shape, they absorb part of the friction and help reduce damage to the wheel axles, fork, swingarm, and surrounding components.
They also help protect the track surface by reducing direct contact between metal parts and the ground.
Why Choose the V1 Wheel Sliders?
Effective Protection
Their specific shape helps reduce impacts during low- to medium-speed crashes while protecting the main components of the rolling chassis.
Universal Compatibility
Designed to fit the majority of motorcycles, they are suitable for everything from 50cc bikes to large-displacement motorcycles.
Two Mounting Solutions
Depending on your setup, the sliders can be installed:
-With a threaded rod passing through a hollow wheel axle.
-By drilling and tapping directly into a solid axle.
This universal design allows compatibility with the majority of existing configurations.
High-Quality Manufacturing
Each slider is made from a wear- and impact-resistant material to provide excellent durability.
Specifications :
Compatibility
-Compatible with the majority of motorcycles
-All engine sizes
-Front and rear depending on your configuration
Manufacturing
-Made in France by 13RACE
-Made to order
Customization
-Available in all colors from the 13RACE catalog
Package Contents
-4 V1 wheel sliders
-M6x30 screws (only if the option is selected)
Installation Advice
-Check the mounting method suitable for your axle.
-Install the sliders using either a threaded rod or a tapped axle.
-Apply threadlocker (Loctite) to the screws before tightening.
-Tighten securely without over-tightening.
-Regularly check screw tightness after the first few uses.
Why Choose 13RACE?
-Made in France.
-Made to order.
-Compatible with the majority of motorcycles.
-Available in all colors.
-High-strength materials.
-Quality control before shipping.
Frequently Asked Questions
Comment fonctionne le programme Ambassadeur!?
Notre programme partenaire est conçu pour récompenser les pilotes et passionnés qui soutiennent et font grandir 13RACE ! Que tu sois sur piste, en MX ou sur la route, voici comment ça fonctionne :
La Sélection : Tout commence par ta candidature via notre formulaire en ligne. Nous analysons ton profil en fonction de ta communauté, de ta fréquence de roulage et de ton expérience avec nos produits.
Le Partage : Si ton profil est retenu, tu reçois des accès pour te connecter à un portail privé ainsi qu'un code promo exclusif à partager autour de toi.
Le Challenge (3 mois) : L'objectif est simple : ton code promo doit être utilisé pour valider 5 commandes. Tu as un cycle de 3 mois pour atteindre cet objectif. Passé ce délai, ton compteur de ventes est réinitialisé et un nouveau cycle démarre !
La Récompense : Dès que tu atteins les 5 utilisations validées, ton espace Ambassadeur débloque automatiquement un code cadeau de -100%. Celui-ci te permet de commander gratuitement la pièce 3D de ton choix parmi notre sélection de récompenses !
N'hésite pas à nous rejoindre et à équiper ta machine pour faire tomber le chrono !
Comment monter les pièces ?
Toutes nos pièces sont conçues pour être "Plug & Play" sur les supports d'origine.
Vos pièces résistent-elles à la chaleur ?
Oui, nous utilisons des matériaux capables de résister sans déformation.
